PVC Parts CNC Machining Manufacturer
PVC material is polyvinyl chloride, which is one of the largest plastic products in the world. The outstanding two features of the PVC part are that lower price, wide application. And PVC resin as a white or light yellow powder, and it can’t be used alone, must go through modification.
In general, we only need to put the proper plasticizer into PVC resin, it will be made into a variety of hard, soft, and transparent PVC parts.
What’s The Characteristic of PVC Parts CNC Machining?
As usual, PVC is divided into hard PVC and soft PVC in our daily life. Hard PVC accounts for about 2/3 of the market and soft PVC accounts for 1/3.
Hard PVC has good tensile, anti-bending, anti-pressure, and impact resistance, so it can be used as structural material alone.
Soft PVC has good flexibility, elongation and cold tolerance will increase, but brittleness, hardness, and tensile strength will decrease.
Meanwhile, PVC also has good electrical insulation properties and can be used as low-frequency insulation material, and its chemical stability is good. Compared with other kinds of plastic parts, PVC has a more effective application of raw materials, reducing fuel consumption. At the same time, PVC has a low energy consumption in the manufacturing industries.
Advantage of PVC tube parts& tube material
1, Light: the weight of PVC material is only 1/10 of cast iron, so it is more advantageous in transportation, installation, and costs.
2, Anti-chemical superiority: PVC has excellent anti-acid and alkali properties.
3, Non-conducting: PVC material can’t conduct electricity, nor is it corroded by electrolysis and current, so it is not necessary to the secondary processing.
4, Not burning, no fire concern
5, Easy installation and low cost:
Easy to be cut and connect, and using PVC glue connection has proved to be reliable and safe.
6, Durability: good resistance to weathering, and can’t be corrupted by bacteria and fungi.
7, Small resistance, high flow rate:
The smooth inner wall, small fluid loss, easy maintenance, and low maintenance costs.
The main application of PVC parts CNC Machining
-
PVC Profiles
PVC profiles have the largest consumption area of PVC parts, accounted for about 25%of the total PVC consumption. It mainly used in the production of doors and windows and some energy-saving materials.
-
PVC pipe
PVC pipe is the second largest consumption area of PVC parts, which accounts for about 20% of others’ consumption. In China, PVC pipe and PP tube are developed early, excellent performance, wide range of use, so it has a significant position in the marketing.
-
PVC film
The PVC film area ranks third in the consumption of PVC parts, accounting for about 10%.
It mainly used in the packaging bag, raincoat, tablecloths, curtains, etc.
-
Daily consumption products`
Basing on low production costs, easy to be shaped, etc, PVC is used to make leather fur luggage, sports products. Such as basketball, football, etc.
Of course, PVC parts also have been widely used in other industries, the wide prospect of PVC parts is developing rapidly all over the world. Its unique properties and functions make which can’t be replaced by any other products.
Creatingway is concentrated on CNC machining manufacturing, prototype machining, low-volume manufacturing, metal fabrication, and parts finishing services, provide you the best support and services. ask us one inquire now.
Any questions or RFQ for metal & plastic technology and custom machining, welcome to contact us below
Call +86-0(755)-89492523 or send an inquiry to us
Welcome visit us, any metal and plastic design and machining questions, we are here to support you. Our services email address:
