PTFE parts CNC machining manufacturer Creatingway
PTFE is commonly called “non-stick coating or easy cleaning material” in our life, so it has resolve some problems in chemical, petroleum, pharmaceutical and other fields. And for now, as one of special engineering plastics, which has been known and applied by more and more people.
As one professional CNC Machining service material, Creatingway not only can machining common engineering plastic parts, but also machining special plastic parts. Such as: PTFE,Nylon, plexiglass parts etc . Today, we will further discuss “PTFE cnc machining parts”.
What’s the characters for PTFE parts CNC Machining?
PTFE has the characteristics of anti-acid, alkali resistance and various organic solvents, and is hardly soluble in all solvents. And PTFE also has high temperature resistance, low friction coefficient, so it can be used as a lubricant and also become an ideal coating for easy cleaning water pipe inner layer.
Advantages& Disadvantages of PTFE parts CNC Machining
-
Advantage of PTFE parts CNC Machining
- High temperature resistance
It can continue to operating in the 250℃work environment
- Low temperature resistance
Good mechanical performance; it can keep 5% elongation when the temperature drops to 196 ℃.
- Corrosion resistance
For most chemicals and solvents, it shows the inertia, strong acid, strong alkali, water and various organic solvents.
- Weather resistance
It has own the best aging life in plastic.
- Good lubrication
The lowest of friction coefficient in solid materials
- No adhesiveness
Its surface tension is the smallest in a solid material and does not adhere to any material
- Non-hazardous
It has stronger the physiological inertia, the artificial blood vessel and viscera long implantation without adverse reactions.
- Electrical insulating property–It can resist 1500 volts of high voltage
Maybe you know more advantages of PTFE cnc machining parts, but it also has a certain deficiencies.
- PTFE has” cold fow”.
PTFE is easily deformation when it continues to work under the continuous load, which brings certain limitations to its application. When PTFE is used as a gasket for sealing, the bolts will be screwed tightly to exceed the specified compression stress, the gasket will be compressed by a “cold flow”.
2, Due to the PTFE part has “No adhesiveness so that it will bring certain limitations on the industrial application.
3, PTFE linear expansion coefficient is 10 ~ 20 times of steel, and bigger than most plastics, so its linear expansion coefficient will be easily changed by temperature.
In additonal, Creatingway is concentrate on CNC machining manufacturing, prototype machining, low-volume manufacturing, metal fabrication and parts finishing services, provide you best support and services. ask us one inquire now.
Any questions or RQF for metal& plastic technology and custom machining, welcome to contact us below
Call +86-0(755)-89492523 or Send an inquire to us
Welcome visit us, any metal and plastic design and machining questions, we are here to support you. Our services email address: