Good Quality From CNC Machined Company Creatingway

 

Good quality, short lead time, best price are all the key points to get customers. Especially the quality, nobody wants to buy a useless thing and waste money. Where is the good quality coming from? How to keep good quality? First, we have to keep the CNC machine in good condition. As one excellent CNC machined Company Creatingway will make better CNC machines maintain and control in the house.

CNC machine is like a person. It will get old after using it for a long time. It may begin to come out of these or those problems which will affect the quality of the product. So the troubleshooting of CNC is really important. Below are several key points that we always keep the CNC machine in good condition to make a good quality product.

 

How to Better Control CNC Machines As CNC Machined Company

• Making machine zero out

Making machine zero out will let the machine know its home position. A CNC machine uses locational information in a
program to position the cutting tool for the machining process. We can move the spindle to the home position by using control, and then the machine will have a
starting reference point.

• Checking edges of tools all the time

If the part finish looks rough or out of tolerance, first, we will check the edges of the tools. For dull and chipped tools, we have to change them for accurate cutting, drilling, or boring.

• Enough oil and air going into CNC machine

Making sure there is enough oil and air going into the CNC machine. If the oil pressure or air pressure for lubrication is too low, the CNC machine will stop and we have to restart the cycle. So in order to make CNC machine continuous uninterrupted cutting, we should keep the machine lubricated and the air flowing, since CNC machines use air to open and close the tool holder as well.

• Coolant flow and reservoir condition

Making sure the coolant flow and reservoir condition is good, or the tooling will be getting too hot and burning up. The coolant lubricates the cutting edges of tools including indexable cutters, end mills, and drills. Sometimes, the coolant flow becomes low, since a large volume of coolant is being blocked by excessive chip build-up. So it is necessary to clean the chip drawer on occasion to prevent the tools from being damaged by heat.

CNC machine is really complex. We always treat them as a friend, giving them full attention, checking them frequently, and making troubleshoot immediately, or the quality will not be stable and could not meet the requirement. Creatingway as one very reliant supplier in China, whatever it is our CNC machines, or our workers, or quality system, all of these we will have our own system to make good training in order to meet the top-ranking level as one excellent CNC machining manufacturer in China. Welcome to inquire about us.

 

Creatingway is concentrated on CNC machining manufacturing, prototype machining, low-volume manufacturing, metal fabrication, and parts finishing services, provide you the best support and services. ask us one inquire now.

 

Any questions or RFQ for metal& plastic technology and custom machining, welcome to contact us below

Call +86-0(755)-89492523 or send an inquiry to us

Welcome visit us, any metal and plastic design and machining questions, we are here to support you. Our services email address:

: sales@creatingway.com